Yet another cute block for this week's Moda Blockheads! This block, Interstellar, was designed by Vanessa Goertzen of Lella Boutique. I was excited when I saw it because I recently became more comfortable with sewing circles AND I decided to use my Circle Savvy Ruler from Creative Grids to make a nice smooth arc.
My first step was to print out the paper template that Vanessa included with her pattern. I make sure my printout is the correct size by checking the 1 inch box for reference.
Next I line up the circle template on the lower corner (bottom and right side) of my printout shape to include seam allowance. I can then look at where my circle template cut line for the arc lines up with the printed sheet for the curve. I have highlighted the section in yellow so you can see the parts I've lined up. I can see my inside piece will be cut to the 10 1/2" circle measurement.
When I put my fabric under the template I again line up my lower right corner to the the lines that will include seam allowance. I cut an arc through the 10 1/2" template. This curve is large enough that I can use a normal rotary cutter but on tighter circles I prefer to use a small blade rotary cutter.
I repeat the same process for the top/outside piece by first lining up the bottom seam allowance line from my printout with the template and looking for the arc that fits. For the outside piece the 9 1/2" circle is the one I want to use.
Line up to seam allowance at the lower right corner and cut the outside piece using the 9 1/2" circle template line.
After cutting my pieces I lay them on the paper template to check them. I MAY have flipped my measurements at some point in the past and learned to double check my pieces! (that's why we buy a little extra fabric, isn't it??)
In order to help me line up the inside and outside parts of the curve for pinning and sewing, I next fold my pieces in half, matching bottom side to right side and make a little crease at the fold.
I fold again so there is an additional crease mark between the middle and edges on both the inside and outside pieces. I will line up these creases when pinning my pieces right sides together.
I pin, starting with the two outer edges, then pinning the middle, then the mid points between the middle and sides.
I'm ready to sew! With curves I slow down and take my time. Sometimes it helps to increase your stitch length too. With a curve of this size I didn't need to make that adjustment. I press my seam outwards and there is a nice graceful curve for my star to live in!
Since I've been doing a little catch-up on my blocks I also did the Corey Yoder version of the star block number 21 (pieced vs applique and you can find it on Corey's blog at http://corianderquilts.com/2018/09/blockheads-wednesday/) so I'm feeling the stars today! For both of these blocks I used Dear Mum fabric and yellows from Dandi Annie by Moda.
Hope this helps if you are using the Creative Grids ruler! I love it and used it for my pattern "Towards the Sun." The pattern has a paper template but I like to use a ruler. You can check your local quilt shop for it and if they don't carry it, you can also find it on amazon or other online sellers.
Happy curved sewing!
Designer of colorful florals for Moda fabrics. Modern to transitional quilt designer. Illustrator, sewist, crafter.
Shop Robin's Designs
© Robin Pickens Inc. All rights reserved. No images may be reproduced without permission.